NEW ALUMINIUM OUTDOOR SLIDE VIEWER ON A
41X101 OF 50X50 MM. FRAMES
07-04-D front side
|The purpose of this viewer
is to show 1 single 3D slide in an outdoor situation on a post
illuminated by day light. The viewer can be opened from the
bottom side by screws and a slot. Then you get access to clean
the interior and exchange the slides.
Inner part seen from front
and rear side.
- Slide frame format:
mm. 2 mm. thick or 41x101 mm. 3 mm. thick.
- By unscrewing 2 butterfly
nuts, you can release the slide and exchange it.
- Maximum slide format is 24x36 mm. standing
lenses of miniscus f= 60 mm. (enlarging
- Lens separation 63 mm.
- Fixed focus.
- Spectacle wearers are able to
see very sharp into the corners of the image.
- A bright shock proof Lexan
frosted glass, provides a colourless light
dispersion. It is mounted out of focus so dirt and
dust is not visible when viewing.
- The pupil distance is fixed
to 62 mm.
- The viewer tips over,
pointing down with the lenses in unused situation
because of a hinge at the bottom of the viewer. The
base of the viewer measures square 80x80 mm. and can
be used to weld on a post.
- The viewer is blank aluminum
and has to be painted. You can choose the color you
want and it will be sprayed with 2 component weather
proof paint. This is included in the price.
Look here for prices
here for the manual
Back to start page
de Wijs, design and production of
Vleugelboot 68, 3991 CL, Houten, the Netherlands
Tel. +31 (0)30 6364928, Fax. +31 (0)30-6361723, e-mail: firstname.lastname@example.org