3-D 10-SLIDE ROTARY VIEWER
model 2007 edition c
here for prices
Product code: 07-02-A-M-c, Motor driven slide
Product code: 07-02-A-H-c, Hand operated slide
3D slide viewer for
exhibitions. Ideal to present high quality 3D images. You have
your own analogue or digital 3D images? Without to much work it
can be presented in this modern metal viewer. Also old 3D glass
plate images and prints on cardboard can be digitally scanned,
retouched and recorded on 35 mm. film. The quality of the optics
in combination with good sharp 3D slides will always astonish
and surprise visitors. The fact that the visitor has to look in
the viewer instead of looking to a digital screen has some
advantages compared with other modern digital 3D presentation
system. The viewer and the visitor only take about a half of a
square meter space.
The visitor is not diverted by his/ her surroundings. The
presented image makes more impression showing it this way.
The still image allows the visitor to investigate the image
and look for details.
The viewer appeals the visitor to act and press the button for
a new slide. It stimulates bystanders their curiosity also
willing to see the images, they can't see yet.
A story of 10 slides is just enough to show a short story in
phases and is short enough not to hold up a long queue of
visitors al want to look in the viewer.
|2007 edition b
12 Volt ac adapter
1 A. (220 Volt slow)
LED backlight cool white + Lee 443 filter (± 4600K)
- tube diameter
- width with
|± 10 kg.
Tube is made of aluminium,
the lens tubes are made of stainless steel.
|1 ocular contains two 120 mm.
achromatic coated d= 37 mm. lenses.
Total focal distance is 60 mm.
|Number of slides:
|Turn the wheel on the right
side to change the slide. The illumination is permanent on.
With the motor driven version, the light goes on after pressing
the button and the viewer changes the slide. The light stays on
until the internal timer turns it off after about 40 seconds.
With dipswitches you can set the viewer to revolve back to the
first slide after the light turns off.
As an option, the push button can be supplied with a cable
that enables to locate the button on another place.
||The electronics can be
modified to allow the light to turn off between the changes of
the slide. No extra costs are charged for this modification
|The big lens diameter enables
spectacle wearers to see the corners of the 3-D
slide. The slide frames can be of cardboard,
plastic (2½ mm.) or mounted between glass (3
mm.) The real picture size can be a maximum of 23
x 33 mm. or 28 x 23 mm. vertical format. Plastic
or cardboard frames are available in all sizes. (except 28 x 23 mm. vertical) The
mechanical construction is guaranteed for a
minimum of 5 years normal use.
Following pictures are examples of how to use the viewer in
an exhibition. De Wijs only made the viewer, not the interior
or the base.
here for the manual and build in dimensions
Back to start page
de Wijs, design and production of
Vleugelboot 68, 3991 CL, Houten, the Netherlands
Tel. +31 (0)30 6364928, Fax. +31 (0)30-6361723, e-mail: email@example.com