Camera's

3D macro camera made out of a Mamya body
Build by T. Pennings in the Netherlands.

Stereo macro camera based on a Mamya medium format body model 645. It is hand made so unique. It has interchangeable lenses for different object sizes (magnifications). With every subject distance and subject field, the lens separation is individually adapted to that specific subject field. On every exchangeable lens are rods mounted to indicate the focus distance, the width of the subject field and center line. The lens separation separately adjustable. So you can change the separation without changing the lens, giving more or less depth in the 3D image. Because of the small diaphragm, pictures have to be made using a flash lamp. The accompanied flash lamp is mounted on the plastic extension of the lens barrel and you can point it correctly on the subject.

specifications:
Slide format: 28mm. wide en 42 mm. high side by side on the film.
Lenses and their magnification:
M4.0 = 4x enlargement, object: 7.2x10.8 mm.
M3.0 = 3x enlargement, object 9.3x14 mm.
M2.1 = 2.1x enlargement, object 13.3x20 mm.
M1.0 = 1:1, object 28x42 mm.
M0.5 = 0.5x reduction, object 56x84 mm.
No focus adjustment, because of the rods on the front it is fixed focus.
Film type 120 mm. rolls.
Shutter time: fixed on 1/60 of a second.
Manual film transport and rewind.

The camera + lenses are user friendly stored in a solid aluminum suitcase with foam blocks. The only ugly thing is that the outside of the suitcase is painted black in a non professional way.
The camera is practically not used and is in new condition.

Price excl. BTW: 1750 Euro

information or buying via: info@dewijs-3d.com

RBT X4 camera, variant A, has been SOLD

 Glass polarization spectacles

This plastic frame GLASS polarization spectacle is coming from the Easton Europe countries. The polarization effect is very good but there is one problem. The position of the filters are 90º aligned with respect to the horizon (one horizontal, the other vertical). The international standard alignment is 45º with respect to the horizon and 90º degrees between left and right filter. Do not use these spectacles during regular organized 3D shows, these often use the international alignment of filters. You can use these spectacles at home with your own projector. Of course you need to adjust the alignment of the filters in your projector with respect to these spectacles. Again, the polarization effect is very good (better than plastic filter material).
The ear brackets have hinges that allows the spectacle to fold flat! You can order plastic filter material for you projector at our company. 

Price excl VAT: 3 Euro.
information or buying at: info@dewijs-3d.com

Display model LT080EE04000 intend to be used as replacement for notebook Sony Vaio P series 1600x768 pixels.

boaght for an experiment but we never were able to get a driver board for this panel. It only fits in the Sony notebook.

So this panel has never been connected to anything. It is brand new.

I have got 2 of these

Prijs: 250 Euro a piece, reply to info@dewijs-3d.com for more information.

Origin: Loh Wetzlar (Germany)
purpose: grinding and polishing spherical surfaces.
year of build: round 1920
amount of polish heads: 6, can work together at the same time.
operation: 380 Volts electrical motor. Distribution of force by leather belts underneath the table.
polish material: iron oxide.

This machine really belongs to some kind of museum. The photo's are showing it at the time it was removed from the original factory. We did restore the machine and left it 100% in it's original condition. From some insiders we heard that this type is rather rare because of it's small size of 6 heads. But you really need a truck to move it because of it's heavy heads, axles and bearings. There are a lot of polish and grind touples accompanying the machine. As far as we can judge, the machine is complete.

Price excl VAT: 2700 Euro.
information or buying at: info@dewijs-3d.com