BUILD IN WALL 3D VIEWER FOR
50X50 OR 41X101 MM. SLIDE FRAMES

NEW MODEL WITH ILLUMINATION CLICK HERE!

This anodised aluminium build in viewer is designed for showing stereoscopic slides in museum and expositions.
The viewer can be mounted against an exposition panel with four M4 bolts at the backside.
For illumination of the slide a hole has to be made in the panel to let the light come through.
The light source can be a cool white PL tube light.

Product code: 00-04-A

Features:
  • slide frame format is 50x50 mm. 2 mm. thickness. or 41x101 mm. 3 mm. thickness
  • Maximal picture format 36x36 mm.
  • Easy change of the slide.
  • coated achromatic lenses F= 60 mm. (enlargement 4.2) pin sharp.
  • Fixed focus.
  • Spectacle users can even see into the corners of the picture bright and sharp.
  • Build-in angle is 30°, with regard to the horizon for easy look in.
  • White milk glass as light dispersion and out of the focus range of the lens.
  • Illumination is NOT included with the viewer.
  • In this stereoscopic configuration, the lens separation is fixed 62 mm.
  • Not for outdoor use!

Look here for prices.

Look here for the manual in build-in sizes

The transformer and the PL tubelight are not included with the viewer set.

You want to see the viewer on location? Click here

 

 

BUILD IN WALL MONO VIEWER FOR 50X50 MM. SLIDE FRAMES

 

This anodised aluminium build in viewer is designed for showing single (mono) slides in museum and expositions.
The viewer can be mounted against an exposition panel with four M4 bolts at the backside, or the front.
For illumination of the slide a hole has to be made in the panel to let the light come through.
The light source can be a cool white PL tube light.


Product code: 00-04-B

Features:
  • slide frame format is 50x50 mm. 3 mm. thickness.
  • Maximal picture format 36x36 mm.
  • Exchanging the slide from the backside.
  • coated achromatic lens F= 60 mm. (enlargement 4.2) pin sharp.
  • Fixed focus.
  • Spectacle users can even see into the corners of the picture bright and sharp.
  • White milk glass as light dispersion and out of the focus range of the lens.
  • Illumination is NOT included with the viewer.
  • For 3-D (stereoscopic) use, two mono viewers can be mounted together with two bolts.
  • In stereoscopic configuration, the lens separation is fixed 62 mm.
  • Not for outdoor use!

Look here for prices.

Look here for the manual in build-in sizes

The transformer and the PL tube light are not included with the viewer set.


Back to start page

de Wijs, Design and production of stereoscopic instruments, 
Populierstraat 44, 4131 AR Vianen, Netherlands, 
Tel. +31 (0)347-372242, Fax. +31 (0)347-355643, e-mail: info@dewijs-3d.com