Film recorder specifications:
The film recorders are acurately calibrated in combination with the film we use and the development lab.
Lasergraphics Mark II, 4000 lines
Files types: Tif of JPG
JPG; baseline compression, 8 bits for each channel, color profile sRGB
TIF; no compression, no layers, 8 bits for each channel, color profile sRGB.

Digital image size for the recorder is 2731x4096 pixels (24x36 mm.)
Larger or smaller images are scalled to the appropiate size. 
Images smaller than 1000x1000 pixels are not recommended. 
Correct film recording requires the above circumstances.
Exposing of 1 slide takes about 1 up to 3 minutes at 4000 lines. 

Stereo pairs.
RBT frames come in different sizes: 21x16, 23x21, 23x28, 23x31,5 en 23x33 mm. On request, we will adapt the file to make it fit right to these frames.

No 3D / stereo.
Of coarse you can expose normal 2D images with the recorder.

Film:
Kodak E100
(We only apply our own film because of colour calibration reasons).

Developping the film:
Developping of the film happens at an external photo lab every day.
Running the normal procedure, we run a recording session the day before the photo lab develops. The film is shiped by normal postal service towards and returned from the developing lab. However we are not responsible for delays caused by shipment services. 

Rush:
When for some reason the process needs to be done within 1 day, we charge 60 Euro's for especially logistics. This is without logistics to the end user. 

Harmonized code for export outside the EU: 3705 00 90 00

Download here a manual for supplying digital material.

Download here an example of a digital file prepared for a slide